Mivec Owners Group
http://mivec.co.nz/forums/

final drive parts.
http://mivec.co.nz/forums/viewtopic.php?f=45&t=8602
Page 1 of 1

Author:  Sack of Spuds [ 16 Aug 2012 09:28 ]
Post subject:  final drive parts.

After a bit of digging I have found that the gen1 cyborg has gears with 67 and 16 forming the FD and that the Colt/Proton GTi FDs are 67 and 17.

I am assuming that these two gears with 67 teeth will be different and are no interchangeable but to be certain is someone able to let me know the part numbers please and also the details of any models using the same FD as the cyborg. Thanks.

Author:  Spetz [ 16 Aug 2012 09:32 ]
Post subject:  Re: final drive parts.

Why would you assume they are different?
Personally I would assume they are the same seeing as they are both 67 teeth.

Author:  Sack of Spuds [ 16 Aug 2012 10:38 ]
Post subject:  Re: final drive parts.

because one meshes with a 16 tooth gear and the other a 17 tooth gear which must be different diameters, yet the gear parts have the same centres ie the Cyborg 67 ought to be bigger than the DOHC non Mivec one. Plus I've seen similar before with ford diffs in escorts.

Author:  broomfish [ 16 Aug 2012 12:06 ]
Post subject:  Re: final drive parts.

i have the Mitsubishi part numbers, but not proton im afraid

CB4A LANCER/MIRAGE 1600/2WD(SEDAN)

1 22605 1 MD736925 GEAR,M/T DIFF DRIVE 01 N=67 FOR MODELS WITH LSD
2 22605 1 MD724611 GEAR,M/T DIFF DRIVE 01 N=67 FOR MODELS WITHOUT LSD
3 22400 1 MD724610 SHAFT,M/T OUTPUT 01 ALL MODELS

Author:  Sack of Spuds [ 16 Aug 2012 18:23 ]
Post subject:  Re: final drive parts.

Sorry should have said Proton dual use their own and Mitsi part numbers. In fact parts usually come in Mitsi packaging with.

ox I am thinking of is the same as the CA Colt GTi - F5M22-2-VXRE

Author:  broomfish [ 16 Aug 2012 20:25 ]
Post subject:  Re: final drive parts.

forgot to say the CA4A DOHC and DOHC MIVEC use the same part numbers

Author:  Sack of Spuds [ 17 Aug 2012 05:39 ]
Post subject:  Re: final drive parts.

Ok thanks for that.

Page 1 of 1 All times are UTC + 12 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/