Mivec Owners Group
http://mivec.co.nz/forums/

4G93 MIVEC Timing Belt HERE!!!!!!!
http://mivec.co.nz/forums/viewtopic.php?f=29&t=2754
Page 6 of 6

Author:  Jayz-1 [ 27 Jul 2008 13:54 ]
Post subject:  Re: 4G93 MIVEC Timing Belt HERE!!!!!!!

I should also add, in changing the ideler pully, you must get adjustable cam gears, as between the machinging of the head and block, head gasket, and the different ideler pully, my cams were about 10 crank deg out from memory...
So it might not have been all the ideler pullys fault, but better to be safe then sorry.

Its a very tight fit, and the tentioner didnt move at all when I undone the bolt.
If you want to get it done in a hurry, it works, but I would try and find one a little smaller if i could, i only used it as i found one at work, so it was a nice easy / quick fix...

Thank you

Jason

Author:  DemonVR4 [ 29 Dec 2018 23:05 ]
Post subject:  Re: 4G93 MIVEC Timing Belt HERE!!!!!!!

really messy topic, read this all and i getted just more confused. few of you tell so different medhods to get right timing belt.(is there any one and right)
After this topic theres is like 3 option
-4g94 timing belt
-4g63 evo timing belt
-1JZ-GTE toyota belt

and then theres the vary between the pulleys.

Is there anyone who can help and tell like the list wich one they used on their build?

1. Belt
2. idlerpulley
3. tensioner pulley
4. oem or other hydraulic tensioner
5. used stock cam sprocket or gone to the adjustable.

Would appreciate if someone share this info. The information would just ease tha task of searching and trying every mentioned stuff and ofcourse wouldnt cost so much. Thanks.

My self building 4g93 1gen colt block + 1gen mivec head. +++ more fun stuff. :D

Author:  Spetz [ 01 Jan 2019 09:59 ]
Post subject:  Re: 4G93 MIVEC Timing Belt HERE!!!!!!!

There's a good thread in the FAQ section that covers it:
viewtopic.php?f=35&t=4309

Author:  DemonVR4 [ 04 Jan 2019 09:06 ]
Post subject:  Re: 4G93 MIVEC Timing Belt HERE!!!!!!!

Spetz wrote:
There's a good thread in the FAQ section that covers it:
viewtopic.php?f=35&t=4309


Thank you. Didnt noticed that been reading many projects but none had info on that.

Page 6 of 6 All times are UTC + 12 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/