Mivec Owners Group
http://mivec.co.nz/forums/

94' mirage asti rx
http://mivec.co.nz/forums/viewtopic.php?f=28&t=7114
Page 5 of 5

Author:  myvec [ 18 Nov 2017 13:31 ]
Post subject:  Re: 94' mirage asti rx

Sorry for the late reply, any evo 1-3 loom will work for the motor. The body alternator wiring has to be modified to reach its new location on front of the motor not on the back like 4g9x motors

Author:  myvec [ 24 Feb 2018 20:46 ]
Post subject:  Re: 94' mirage asti rx

Hey just thought its been long enough for a small update. Wheels get swapped between the mirages depending on my mood :lol:

Finally got a set of headers installed from another members mirage which worked out well with looks and little more peep but also made my deep exhaust note into rasp so 2steps forward and 1 back but ill get around to sorting a better resonator setup to help with that :wink:

Attachments:
28166271_2077198448957765_5738489759078678385_n.jpg
28166271_2077198448957765_5738489759078678385_n.jpg [ 160.06 KiB | Viewed 678 times ]
28166299_2077198342291109_7193575589970508394_n.jpg
28166299_2077198342291109_7193575589970508394_n.jpg [ 102.8 KiB | Viewed 678 times ]
28168654_2077198402291103_2019601906775575589_n.jpg
28168654_2077198402291103_2019601906775575589_n.jpg [ 114.31 KiB | Viewed 678 times ]
28167707_2077198505624426_7864798589011095167_n.jpg
28167707_2077198505624426_7864798589011095167_n.jpg [ 109.92 KiB | Viewed 678 times ]
28166272_2077194495624827_6862873903854041878_n.jpg
28166272_2077194495624827_6862873903854041878_n.jpg [ 132.83 KiB | Viewed 678 times ]
28378403_2077194402291503_6935331281208206618_n.jpg
28378403_2077194402291503_6935331281208206618_n.jpg [ 115.48 KiB | Viewed 678 times ]
28378075_2077194295624847_7272894545789240826_n.jpg
28378075_2077194295624847_7272894545789240826_n.jpg [ 78.36 KiB | Viewed 678 times ]
28058868_2077194662291477_1849640100379041490_n.jpg
28058868_2077194662291477_1849640100379041490_n.jpg [ 170.41 KiB | Viewed 678 times ]

Author:  Spetz [ 01 Mar 2018 02:16 ]
Post subject:  Re: 94' mirage asti rx

Looks nice, too bad about the raspy sound.
Are they stainless?

Author:  myvec [ 08 Mar 2018 17:51 ]
Post subject:  Re: 94' mirage asti rx

Yeah they are stainless, i also have a full 2.5'' exhaust but really just need a better resonator setup over one coby resonator up front and a average box muffler at the back. A company here in nz called 'Adrenalin R' make really good mufflers that worked well on my hatch, so might get another something through them to try sort it.

Also a rare couple of pictures of both my toys out together for a change

Attachments:
28795019_2094873543856922_6274388793740829124_n.jpg
28795019_2094873543856922_6274388793740829124_n.jpg [ 123.62 KiB | Viewed 629 times ]
28959224_2094873597190250_3423223811903871914_n.jpg
28959224_2094873597190250_3423223811903871914_n.jpg [ 201.2 KiB | Viewed 629 times ]

Author:  Spetz [ 10 Mar 2018 20:49 ]
Post subject:  Re: 94' mirage asti rx

The hatch looks pretty nice

Author:  loz [ 10 Mar 2018 21:58 ]
Post subject:  Re: 94' mirage asti rx

Ah I thought i recognised those headers, i sold them to you ha ha.

Looks good man. Yes they do change the sound quite a lot, when we first got the car with those headers fitted it was very loud and raspy but changing from a stainless bean can style muffler to a pressed steel muffler toned it down heaps. They also make it sound like its revving to 10,000rpm rather than 8000!

Author:  myvec [ 11 Mar 2018 20:14 ]
Post subject:  Re: 94' mirage asti rx

Thanks its a cc4a factory 4wd with evo running gear. Haha yeah they sure do, its a chambered muffler on the back atm but it doesn't do much to stop the resonance coming down the system. i do have a swap out jap cannon for the rear which is just pure unlegal noise now :lol:

Author:  ian_johnston [ 15 May 2018 15:46 ]
Post subject:  Re: 94' mirage asti rx

On the off chance do you still have the old rear brake setup lying round that you would be willing to sell ?

Author:  myvec [ 19 May 2018 12:24 ]
Post subject:  Re: 94' mirage asti rx

Hey no sorry as I'm still using my factory rear calipers etc just with evo 1-3 discs to suit the 114.3 hubs

Page 5 of 5 All times are UTC + 12 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/