Mivec Owners Group
http://mivec.co.nz/forums/

00 Lancer Mivec
http://mivec.co.nz/forums/viewtopic.php?f=28&t=3332
Page 6 of 7

Author:  mitserwilko [ 05 Nov 2007 08:44 ]
Post subject: 

no i havent felt her really losing grip, i just feel i get a bit of an after sway from the rear and that sounds great thanks for the help mate also looking into putting a kaaz lsd into the gearbox and a shorter final drive, will the kaaz lsd be too much for a road car and will the shorter final drive be worthwhile?

Author:  AUGASM [ 05 Nov 2007 10:32 ]
Post subject: 

hey man,

just wana ask how much difference did the rpw headers make?

Author:  mitserwilko [ 05 Nov 2007 11:57 ]
Post subject: 

i have noticed more torque pull high up in revs but its not amazingly noticable its getting dyno'd in two weeks time so ill be able to tell you if its made any actual difference then as she made 160bhp and i think 114 lb ft of torque

Author:  mitserwilko [ 25 Feb 2008 13:18 ]
Post subject:  Re: 00 Lancer Mivec

Finally got around to fitting my headlights and carbon gauge surround also fitted my new front and rear strut brace's all thanks to Rs mivec and have lovely set of Omori gauges going into her soon aswell again thanks to Rs mivec and thanks too Evonut for the spirit of competiton sticker looks really well i think.

Here are a few pictures anyway had to take the HID's out for the time being.

Image

Image

Image

Image

Image

Image

Author:  DRTDVL [ 27 Feb 2008 23:16 ]
Post subject:  Re: 00 Lancer Mivec

lookin nice man

Author:  mitserwilko [ 29 Feb 2008 09:44 ]
Post subject:  Re: 00 Lancer Mivec

thanks mate i have more stuff in line for her too just waiting for it too arrive from RPW

Author:  digi92 [ 15 Apr 2008 19:09 ]
Post subject:  Re: 00 Lancer Mivec

love wat uve dun to this mivec......keep it up

Author:  mitserwilko [ 15 Apr 2008 21:01 ]
Post subject:  Re: 00 Lancer Mivec

Hopefully some updates before the end of the month :D

Author:  rpm [ 16 Apr 2008 14:15 ]
Post subject:  Re: 00 Lancer Mivec

Hi just a note on the rear problem. I have both upper and lower strut braces in the rear and it is real twitchy. It will grip to a point and then very quickly let go without much notice. If i go near a track again I'll try removing the lower one and seeing if it gets any better.

Author:  Bart [ 16 Apr 2008 17:08 ]
Post subject:  Re: 00 Lancer Mivec

WIMP :lol: Wait you drive a car with a cage and all the supension towers triangulated with tube. Makes strut braces seem spongy by comparison.

Author:  mitserwilko [ 09 Jun 2008 06:41 ]
Post subject:  Re: 00 Lancer Mivec

Update 08.06.08

A few bits to update

Finally got the exhaust sorted it no longer knocks when the car moves and i have swapped out the RPW manifold for the standard RS one which now has a nice heat sheild.

Next was the whiteline rear swaybar and the anti-lift/castor kit and cusco type II under strut brace all made a massive difference and of course the ralliart engine mounts these have completely transformed the feel of the gearbox and general drive of the car.

here are some pictures of the rear swaybar and other braces and the heat sheild on the
manifold.

Image

also fitted the rocker cover yesterday and very happy with the turn out.

Image

Image

Image

Massive thanks to todd for fitting everything and andy autobits for supply all the whiteline gear

Oh and here is what is too come and when i get some more time the 63mm T.B will go on aswell.

Image

Image

Image

Image

Image

Author:  Rev Happy [ 03 Jul 2008 12:49 ]
Post subject:  Re: 00 Lancer Mivec

I have seen another guy on IMOC with a yellow rocker cover looks better with just top cover done.Shame to colour the mivec logo a real shame

Author:  mitserwilko [ 03 Jul 2008 20:59 ]
Post subject:  Re: 00 Lancer Mivec

Well thats great to know thanks :roll:

Author:  summitsvift [ 06 Jul 2008 20:32 ]
Post subject:  Re: 00 Lancer Mivec

what brand of flywheel is it ? lookin really good but i thought that Mivec is 7 lug flywheel

Author:  mitserwilko [ 06 Jul 2008 23:31 ]
Post subject:  Re: 00 Lancer Mivec

I never even noticed that i think a few phone calls will have to be made

Page 6 of 7 All times are UTC + 12 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/