Mivec Owners Group

Hi all, I am currently building a 3.8 DOHC Mivec and I'm chasing an engine loom. Just wondering if anyone could help me out. Cheers

Can I ask what the CR is ?
only that it ends up waaaaay too high (like a diesel) due to the differences of in CC in the head.


As for the loom, all I can suggest is to check out trademe.
If you get really stuck, you could use a loom from a normal 2nd gen Diamante, probably only 2 or 3 wires to change.
I've got a stock ECU from a mivec Diamante (30M), tucked away somewhere.Also some patrs of the loom for the ignition.

_________________
6G72 mivec Twin TDO5 20Gs up and running.
6G72 mivec bored and stroked to 3.4 litres...Frankenmitsi build
6G74 mivec bored and stroked to 3.9 litres....Frankenmitsi build.
6G75 under construction....4.2 litres bored and stroked.Another Frankenmitsi.

Not sure on the CR as of yet, will let you know when I get to that stage.

As for the loom, the FTO loom is pretty the same as the 30M (ECU plugs are different) so did manage to use that. Just need to reflash the ecu to suit the engine